Lenovo Windows Laptops Error Codes

Bad SVP data, stop POST task.

Checksum of the supervisor password in the EEPROM is not correct. The system board should be replaced.

Bad CRC of Security Settings in EFI Variable. Enter ThinkPad Setup.

Checksum of the Security settings in the EFI Variable is not correct.

EAIA data access error

The access to EEPROM is failed. Have the computer serviced.

Invalid RFID Serialization Information Area

The EEPROM checksum is not correct (block # 0 and 1). The system board should be replaced, and the box serial number nee...

Invalid RFID configuration information area

The EEPROM checksum is not correct (block # 4 and 5). The system board should be replaced, and the universally unique id...

Critical low-battery error

The computer turned off, because the battery power is low. Connect the ac power adapter to the computer and charge the b...

System Security - Invalid remote change requested

The system configuration change has failed. Confirm the operation and try again.

System Security - Security password retry count exceeded.

This message is displayed if you enter a wrong supervisor password more than three times.

Real Time Clock Error.

System Real Time Clock is not functional. Have the computer serviced.

Check Date and Time settings.

Neither the date nor the time is set in the computer. Set the date and time, using ThinkPad Setup.

Unauthorized network card is plugged in - Power off and remove the network card.

The wireless network card is not supported on this computer. Remove it.

More than one external fingerprint readers are attached.

Power off and remove all but the reader that you set up within your main operating system.

Detection error on SSD0 (M.2)

The solid-state disk is not working. Have the solid-state disk serviced.

Read error on SSD0 (M.2)

The solid-state disk is not working. Have the solid-state disk serviced.

Machine Type and Serial Number are invalid.

Machine Type and Serial Number are invalid. Have the computer serviced.

Machine UUID is invalid.

Machine UUID is invalid. Have the computer serviced.

Detection/Read error on HDDx/SSDx

Reinstall the storage drive. If the problem still exists, replace the storage drive.

The operating system or programs cannot create, modify, or delete data in the non-volatile system UEFI variable storage due to insufficient storage space after POST.

Press F1 after the error message is displayed to enter the UEFI BIOS menu.

The thermal fan might not work correctly.

Press Esc within five seconds to start up the computer with limited performance.