Dryers Error Code tS
CriticalDIY fixableError code tS on a dryers is a critical-level fault. Common causes include Clogged lint trap, Crushed or kinked exhaust hose, Blocked exterior vent, Failed cycling thermostat, Vent run too long (over 25 feet). This can typically be resolved without professional help by checking each potential cause systematically.
A critical-level error on a dryers means the appliance has detected a condition that prevents normal operation. The appliance may have shut down to prevent damage or safety hazards. Address this error before continuing to use the appliance.
Common Causes
- Clogged lint trap
- Crushed or kinked exhaust hose
- Blocked exterior vent
- Failed cycling thermostat
- Vent run too long (over 25 feet)
Can I fix this myself?
Yes. This error can typically be resolved by checking the common causes listed above. Start with the simplest fix first and work down the list.
What to Do Next
Step-by-step diagnosis for common dryers problems
Preventive maintenance can resolve and prevent many error codes
If the error persists after troubleshooting, a qualified technician can diagnose the specific component failure
Other Dryers Error Codes
Common Questions
How do I clear error code tS on my dryers?
First, address the underlying cause — clogged lint trap. Once the issue is resolved, try power cycling the appliance: unplug it for 60 seconds, then plug it back in. Many dryers will clear the error code after a successful restart. If the code reappears, the root cause hasn't been fully resolved.
Is error code tS dangerous?
Error code tS is classified as critical, meaning your dryers has detected a condition that could cause damage or pose a safety concern. Stop using the appliance until the issue is resolved. If you smell gas, see smoke, or notice water leaking, turn off the appliance at the circuit breaker and call a professional immediately.
How much does it cost to fix error code tS?
If the cause is clogged lint trap, a DIY fix may cost nothing beyond your time. If parts are needed, typical dryers replacement parts range from $20 to $200 depending on the component. A professional service call typically costs $100-250 for diagnosis plus parts and labor.
Need structured error code data in your app?
Access this data programmatically via the Covala API.